Did a Power Flicker Fry Your AC Board?
Outages are not rare here. One outage tracker logged 129 local outages in a 90 day span, from storms to cars hitting poles. When power drops and comes back, it can arrive with a spike.
That spike is hard on electronics. AC and heat pump control boards, fridge boards and washer controls often fail after an outage, and replacing one board can cost hundreds of dollars. Surge protection after power outage events is the simple fix most owners wish they had added sooner.
Surges also come from inside the home. Large motors like AC compressors and well pumps create small spikes every time they start, and protection at the panel helps with those too.
Homes That Benefit Most From Surge Protection
- EV owners: Chargers carry expensive electronics that do not like spikes.
- Heat pump owners: Variable speed systems rely on sensitive control boards.
- Home offices: Computers, routers and monitors sit on the line all day.
- Smart homes: Thermostats, cameras and garage door openers are all small computers.
- Anyone after a recent outage: If something already failed, the next spike is the time to be ready.
Even small surges add up. Electronics exposed to repeated spikes can wear out sooner without any single dramatic failure, which is why many owners add protection before anything breaks.
Add Surge Protection During Panel Work and Save
The lowest cost time to add a surge protector is while the panel is already open. Surge protection with panel upgrade work adds only a small amount of labor, since the power is already off and the electrician is already there.
If you are booking a panel swap, a 200 amp upgrade or a service upgrade, ask us to include it in the same written price.
If you are not planning panel work soon, a stand alone install still makes sense, especially after a recent outage damaged something in your home.
Whole House Surge Protection Installed at Your Panel
Here is what every surge protector installation North Highlands owners book includes:
| Included | What It Does |
|---|---|
| Panel mounted device | Catches spikes before they reach your circuits |
| Dedicated breaker | Connects the device safely to the panel |
| Grounding check | A surge protector works only as well as its ground |
| Indicator lights | Show at a glance that protection is active |
| Testing | We confirm it works before we leave |
Each install follows our price first approach: you know the cost before the cover comes off.
If your grounding needs work, we fix it as part of the job. A surge protector with a weak ground cannot send a spike safely to earth, so this step makes the whole system work.
Extra Protection for AC, Heat Pump and EV Charger Electronics
Whole house protection handles large spikes at the panel. Layering adds a second line of defense where it counts most:
- Surge protection for AC unit North Highlands summers depend on: The outdoor unit and its board are often the priciest part to replace.
- Surge protector for EV charger circuits: Protects the charger and the car’s charging electronics.
- Point of use strips: For TVs, computers and routers inside the house.
Our electricians explain which layer fits your home, so you do not buy more than you need.
We can add these during the same visit.
Surge Protection Added After Recent Outages
Recent jobs include a panel surge protector install 95660 owners booked after a storm killed their AC board, and a whole house surge protection Carmichael job added during a panel swap.


The North Highlands owner lost an AC control board after a winter storm. We installed a panel mounted protector and checked the grounding, which turned out to need a new ground clamp.
Surge Protection Devices We Trust and Install
We install Type 2 surge protective devices from established panel and device makers, including Leviton, matched to your panel brand where possible. A Type 2 surge protector install Sacramento County inspectors see is the standard for homes, and Type 1 devices are available for meter side protection.
Most panel mounted devices show a green light when protection is active. If a large surge uses up the device, the light changes, and replacement is a quick visit.
Whole House Surge Protector Pricing in North Highlands
Most installed whole house surge protectors in the Sacramento area run $300 to $1,200, depending on the device and panel. That is your typical whole home surge protection cost.
| Install Type | What Affects Price |
|---|---|
| Added to existing panel | Device grade and open slot |
| Added during panel work | Lower labor, panel already open |
| Layered with point of use | Number of devices added |
Range from ConsumerAffairs.
Your whole house surge protector price comes in writing before installation, with no extra charge for the grounding check.
Compare that to the cost of a new AC control board or refrigerator board, and many owners find the protector pays for itself after one bad outage.
Protect Your Electronics Before the Next Storm
Winter storms bring outages, and outages bring spikes. Book your install now and be ready before the next one.
FAQs: Surge Protection in North Highlands
Common questions before you add surge protection to panel equipment.
Installed devices in the Sacramento area often run $300 to $1,200, depending on the device and panel. It costs less when added during panel work.
Most installs take one to three hours with a short power shutoff at the panel. We test the device and grounding before we leave.
Usually, yes, if the panel has an open slot. If you have a Federal Pacific or Zinsco panel, we recommend replacing the panel first so the protector sits on safe equipment.
Areas We Serve

