Found a Federal Pacific Stab Lok Panel?
Open your panel door and look for the FPE logo, the words Stab Lok or breakers with a thin red stripe on the toggles. If you see any of those, you have a Federal Pacific panel.
These panels went into thousands of homes from the 1950s to the 1980s, and many insurers and inspectors now ask owners to replace them. The concern is that some Stab Lok breakers may not trip when a circuit overloads. A new panel removes that question for good.
Do not try to test or reset Stab Lok breakers yourself beyond normal use. If one feels hot, smells burnt or will not reset, leave it off and call. We can make the circuit safe while the full swap gets scheduled.
Homeowners Who Should Replace an FPE Panel First
Some situations put a Federal Pacific panel at the top of the list.
| Your Situation | Why It Moves Up the List |
|---|---|
| Insurance renewal deadline | Federal Pacific panel insurance replacement keeps your policy active |
| Home in escrow | A Federal Pacific panel home sale replacement keeps closing on time |
| Breaker that will not reset | A failed Stab Lok breaker replacement North Highlands owners try is often a short fix |
| Adding an EV, heat pump or range | New loads on an old panel add risk and use up space |
| Warm or buzzing cover | Heat at the panel needs a licensed look soon |
Fast Federal Pacific Swaps, Often Within the Week
We know a renewal letter or escrow date does not wait. That is why same week FPE panel replacement is often possible for us.
- Day 1: You text a photo of the panel and label, and we send a price range.
- Day 2: A short visit confirms the job and you get a written price.
- Day 3: We file the permit with the county online.
- Swap day: The old panel comes out and the new one goes in, usually in 4 to 8 hours.
Same Size FPE Swap or a Move Up to 200 Amps
Many owners use the swap to plan ahead. The choice depends on what you run now and what you plan to add.
| Same Size Swap | Move Up to 200 Amps |
|---|---|
| Best if loads stay the same | Best for an EV, heat pump or induction range |
| Lower cost | Room for future circuits |
| Existing meter usually stays | Meter base often changes |
| Faster to schedule | May qualify for SMUD Go Electric up to $2,000 |
An FPE panel upgrade 200 amp job follows the same load calculation first rule we use on every panel. If the math says same size is enough, that is what we quote.
If you are unsure, start with the load calculation. It costs nothing extra and shows clearly which path fits your home.
Federal Pacific Paperwork Your Insurer Asks For
Insurers rarely take your word for it. They want proof the Federal Pacific box is gone. When your swap is done, you get:
- The finaled permit from Sacramento County Building Permits and Inspection
- Before and after photos of the panel
- An invoice listing the new panel brand and breakers
- The CSLB license number of the C10 electrical license holder who did the work
That handover follows our permit on every job promise, so you can send everything to your carrier the same day.
Federal Pacific Panels Removed From Local Homes
Recent jobs include an FPE swap off Elkhorn Boulevard before an insurance renewal and a Federal Pacific panel replacement Arden Arcade buyers asked for during escrow.


In the escrow job, the buyer’s agent needed proof of replacement before closing. We swapped the panel, passed inspection and sent the finaled permit and photos straight to the agent.
New Panels That Take the Place of Federal Pacific Boxes
Your replacement panel comes from a widely stocked brand, so parts are easy to find years from now. We fit new breakers to every circuit, add AFCI and GFCI protection where the California Electrical Code calls for it and label each breaker clearly. A whole house surge protector is a smart add on while the panel is open.
We also check the grounding and bonding during every FPE swap. Many older homes have weak grounding, and a new panel works best with a solid ground behind it.
Federal Pacific Swap Prices
Your FPE panel replacement cost depends mostly on panel size and the condition of the meter base.
| Job | Typical Sacramento Area Range |
|---|---|
| Same size FPE swap | $2,500 to $4,500 |
| Swap plus new meter base | $3,500 to $6,000 |
| Swap plus full 200 amp service | $4,500 to $8,000 |
Ranges from SacValley Contractors 2026.
An FPE panel swap 95660 homes need, or a job to replace Federal Pacific breaker box Sacramento County wide, gets a written Federal Pacific panel replacement price before any work begins.
Since FPE panels are often flagged during insurance renewals, ask your carrier if they offer any credit after replacement. Some owners find the swap pays back faster than expected.
Send a Photo of Your FPE Panel Label
One clear picture of the label inside your panel door tells us the size and model. Text it over for a price range today.
FAQs: Federal Pacific Replacement in North Highlands
Quick answers if you are wondering who replaces Federal Pacific panels around here.
Most same size FPE swaps in the Sacramento area fall between $2,500 and $4,500. Moving to 200 amps or replacing the meter base adds to that. You get a written price before work.
Often within the same week. Send a photo of the panel and label, we give a range, file the county permit online and book your swap day.
Most insurers ask for the finaled permit, photos and an invoice listing the new panel, and we provide all three. Check with your carrier for any extra form they use.
Areas We Serve

